This line of non-fusible interlinings is made of different materials (woven, knitted, non-woven) and is of different weights. Woven and non-woven interlinings of this group ensure successful enforcement of very different qualities of leather. Knitted interlinings (sort of tricot) enable forming of the round parts of shoes and especially of boots. These articles are covered by resin in shape of dot or scattered coating. The difference between these two types of coating is in the volume (range) of covered surface of the fabric by the resin. The advantage of dot coated interlining is pleasant and soft handling, what is especcialy important in case of fusing soft leather. New modern technology (HOT MELT) enables us the production of these new interlinings. Special property of these thermoplastes is a resin with very low melting point; therefore the fusing of the most sensitive kinds of leather is possible at extremely low temperature. Generally artikels:Coating with different sorts of thermoplastes(EVA, PA(HotMelt blue dots), PUR, PES, … ) Knitted materials-jersey: from 120 g/m2 to 325 g/m2 raw and colour Woven materials : from 95 g/m2 to 290 g/m2 raw and colour Laminates for shoe industry – are mostly used as components of sports footwear. They are produced as two-, three,- or four-layers. There are used different materials as: knitted goods, non-vowen, foam,… Between above listed materials breathable membrane is laminated as medial layer, which gives to the final product favourable applicable properties. Footwear with such multi-layer laminate built in, is breathable and waterproof. TexStar laminates Catalog: